This method is similar to the cut stump method, but is suited to vines and multi-stemmed shrubs. Here, the plant stems are cut through completely, close to the ground. Herbicide is then applied immediately to the cut surface emerging from the ground, via spray or brush application.
In the case of madeira vine and some other vines with aerial tubers, both ends of the cut stems must be treated with herbicide. An effective way of doing this is to hold both 'bunches' of cut stems in a container of herbicide for 15 seconds after cutting, so that maximum translocation occurs to both ground and aerial tubers. Extra care should be taken when doing this to ensure spillage does not occur.